Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices, including: DPF’s (diesel particulate filters), SCR (Adblue) / EGR NOX reduction systems, diesel oxidation catalysts (DOCs) and Adblue Slip-Catalysts.
The profile of Versimax HD11 5W-30 provides the highest level of rationalisation potential in mixed fleets where a number of manufacturers, models and engine technologies are being used. The low / mid SAPS (Sulphated Ash, Phosphorus and Sulphur) additive profile coupled with synthetic technology base fluids also ensures a high level of component protection and cleanliness when operating in very severe conditions with extended drain intervals.
Versimax HD11 5W-30 provides the following benefits:
• Highest level of rationalisation potential for mixed fleets
• Maintains efficiency of exhaust after treatment devices
• High level of component protection
Versimax HD11 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified. Can also be used in combination of low sulphur diesel fuel (maximum 50ppm) and where any of the following specifications listed below are required by the manufacturer.
Always check manufacturers handbooks to ensure the correct engine oil is being used or seek technical advice.
Versimax HD11 5W-30 has the following performance levels:ACEA E4 / E6 / E7 / E9, API CJ-4, Scania LDF-4 (Approval pending), MB 228.51, MAN M3677 (Approval number TUC 0566/17), MTU Category 3.1, Volvo VDS-4
Available in the following sizes:
• 250L, Part no: LDF 205
• 25L, Part no: LDF 025
Tel:+44 (0)1743 232 200 Email: email@example.com
All parts can be purchased at competitive rates from your local CV Distributor, click here to find your local part distributor.